Home » OIL HEATING & PUMPING UNITS

OIL HEATING & PUMPING UNITS


OIL HEATING & PUMPING UNITS
DPDH - Duplex with 2 Pump & 2 Heaters DPH - with 2 Pump & 1 Heater Oil Lifting Pumps
Pumping & Heating System SPH - Simplex with one Heater & Pump SPU OR DPU - Pumping Unit Available Without Heaters For Light Oil
 Pumping & Heating System
Description:
  • The unit is designed to supply fuel to the burners at a constant pressure and temperature for better combustion.
  • The unit consists of motor, gear pump, oil filters vertical preheaters, pressure gauge, temperature gauge, thermostat, etc. with inter connecting pipe lines and is ready to install near furnaces.
  • Pumping and heating units are available in 4 models.
  1. SPH-simplex with one heater and pump.
  2. DPDH-Duplex with 2 pump and 2 heaters.
  3. SPU or DPU – Pumping unit available without heaters for light oil application.
  4. DPH – with 2 pump and 1 heater.
  • Using of P and H unit would reduce oil consumption and use of over head storage tank can be avoided.
  • Capacity available from 1 kw to 100 kw for 15 ltrs. to 2500 ltrs./hrs. at 100° C.
 SPH - Simplex with one Heater & Pump
Description:
The unit is designed to supply fuel to the burners at a constant pressure & temperature for better combustion.
The unit consists of motor, Gear Pump, Oil Filters vertical pre heaters, pressure gauge, temperature gauge, thermostat etc. with inter connection pipe lines and is ready to install near furnaces.
Pumping & Heating units are available in 4 models.
  • SPH - Simplex with one Heater & Pump
  • DPDH - Duplex with 2 Pump & 2 Heaters
  • SPU or DPU - Pumping unit available without heaters for light oil application
  • DPH - with 2 Pump & 1 heater
Using of P & H unit would reduce oil consumption and use of over head storage tank can be avoided.
Capacity available form 1 KW to 100 KW for 15 ltrs. to 2500 ltrs/hrs. at 100°C.

 SPU OR DPU - Pumping Unit Available Without Heaters For Light Oil Application
Description: The unit is designed to supply fuel to the burners at a constant pressure & temperature for better combustion.
The unit consists of motor, Gear Pump, Oil Filters vertical pre heaters, pressure gauge, temperature gauge, thermostat etc. with inter connection pipe lines and is ready to install near furnaces.
Pumping & Heating units are available in 4 models.
  • SPH - Simplex with one Heater & Pump
  • DPDH - Duplex with 2 Pump & 2 Heaters
  • SPU or DPU - Pumping unit available without heaters for light oil application
  • DPH - with 2 Pump & 1 heater
Using of P & H unit would reduce oil consumption and use of over head storage tank can be avoided.
Capacity available form 1 KW to 100 KW for 15 ltrs. to 2500 ltrs/hrs. at 100°C.


Home   |   About Us   |   Our Products  |   Resources  |   Contact Us   |   Enquiry